If your cable or satellite provider uses a set-top box that connects to the TV via HDMI, you can skip the channel-tuning process. 4. Begin scanning for channels. Once set to the TUNER display option of your choice, the selection should remain for the duration of your session as long as you use the TUNER ON/OFF foot pedal to enter/exit the TUNER mode/view. Note: However, when in a TUNER display option, the user happens to switch to a different MEMORY patch, the TUNER display will revert to the default Done some more digging on the web and realized that Freesat is on 28.2 E, so even telling the tuner in the TV to look for 19.2 E it won’t find it as my dish is pointing at 28.2E, all the channels it finds with a 19.2E search, are in fact from the 28.2E. So, solution is an additional dish to point at 19.2E, then some kind of switch between the I have one TV - a SEIKI, that receives many more channels than my other two TV's on the same antenna/cable/location (one of the others is a new RCA). Seiki is available from Sears/Kmart/HH Gregg. I can't find any more info on tuners other than the more expensive the TV, the better the tuner. I'm now looking for one more TV. An OTA Box Turns Free TV into a Cable-Like Experience. To watch free over-the-air TV channels, all you need is an antenna---you don't need an OTA box. But an OTA box adds quite a few features, including the ability to record channels. At its core, an OTA box is a DVR for over the air TV. Even the most basic (or cheapest) OTA box can be GM based platforms have 4 choices for the MIL set and SES enable/disable. I get the SES enable, its for the service related tripped errors. But with only a check box and not the normal choices for when to throw the Malfunction Indicator Lamp (MIL) or not to report at all, what does unchecking the MIL box actually do? J0Po.

what is tuner mode on tv